Examining System Configuration; Show Config - DEC 4000 AXP Service Manual

6.2 Examining System Configuration
Several console commands are available for examining system configuration:
• (Section 6.2.1)—Displays the buses on the system and the
show config
devices found on those buses.
• show device (Section 6.2.2)—Displays the devices and controllers in the
system.
• (Section 6.2.3)–Displays main memory configuration.
show memory
6.2.1 show config
The show config command displays the buses found on the system and the
devices found on those buses. You can use the information in the display to
identify target devices for commands such as
that the system sees all the devices that are installed.
Synopsis:
show config
Examples:
>>> show config
and , as well as to verify
boot test
System Configuration and Setup 6–25