DEC 4000 AXP Service Manual page 192

Table A–1 (Cont.) Environment Variables
# Variable
System-Dependent Environment Variables
ez*0_def_ginetaddr
ez*0_def_inetaddr
ez*0_def_inetfile
ez*0_def_sinetaddr
ez*0_driver_flags
ez*0_ginetaddr
Key to variable attributes:
NV - Nonvolatile. The last value saved by system software or set by console commands is preserved
across system initializations, cold bootstraps, and long power outages.
W - Warm nonvolatile. The last value set by system software is preserved across warm bootstraps
and restarts.
RO - Read-only. The variable cannot be modified by system software or console commands.
A–10 Environment Variables
Attributes Function
NV Supplies the initial value for ez*0_ginetaddr
when the interface's internal Internet database
is initialized from NVRAM (ez*0_inet_init is set to
''nvram'').
NV Supplies the initial value for ez*0_inetaddr
when the interface's internal internet database
is initialized from NVRAM (ez*0_inet_init is set to
''nvram'').
NV Supplies the initial value for ez*0_inetfile when
the interface's internal Internet database is
initialized from NVRAM (ez*0_inet_init is set
to ''nvram'').
NV Supplies the initial value for ez*0_sinetaddr
when the interface's internal Internet database
is initialized from NVRAM (ez*0_inet_init is set to
''nvram'').
Specifies the flags to be used by the driver.
Current values are:
1 NDL$M_ENA_BROADCAST will enable
broadcast messages.
2 NDL$M_ENA_HASH will enable hash
filtering.
4 NDL$M_ENA_INVF will enable inverse
filtering.
8 NDL$M_MEMZONE will allocate the
message buffers from memzone.
Accesses the gateway address field of the
interface's internal Internet database. This
is normally the address of the local network's
gateway to other networks.
(continued on next page)