[-cat]
(test_group) Specifies the test category to be executed. The possible
categories are as follows:
•
Init: Initialization tests
•
Extended: Extended tests (default category)
•
System: System tests
•
Manual: Manual tests
•
x: Bit mask of the desired test categories
[-opt]
(test_option) Specify the Test Start CSR Option field bits to be set. The
possible option bits are as follows:
•
Loop_error: Loop on test if an error is detected
•
Loop_test: Loop on this test
•
Cont_error: Continue if an error is detected
•
x: Bit mask of the desired option bits
The default value for this qualifier is based on the current values in the
global enviroment variables as follows:
•
Loop_test: 1 if D_PASSES = = 0 ; 0 otherwise
•
Loop_error: 1 if D_HARDERR = = "Loop" ; 0 otherwise
•
Cont_error: 1 if D_HARDERR = = "Continue" ; 0 otherwise
Running System Diagnostics 3–17