Table of Contents
Advertisement
Figure 2–2: Sample Error Summary
KA660-A
Vn.n
VMB n.n
Performing normal system tests.
95..94..93..92..91..90..89..88..87..86..85..84..83..82..81..80..
79..78..77..76..75..74..73..72..71..70..69..68..67..66..65..64..
63..62..61..60..59..58..57..56..55..54..53..52..51..50..49..48..
47..46..45..44..43..42..41..40..39..38..37..36..35..34..33..32..
31..30..29..28..27..26..25..24..23..22..21..20..19..18..17..16..
15..14..13..12..11..10..09..08..07..
?58 2 02 FE 0004 0000 02
P1=00000001
P2=00000000
P6=00000000
P7=00000000
r0=90000026
r1=00000000
r5=00000000
r6=00004018
Normal operation not possible.
>>>
If possible, print out the error summary and give it to your Digital service
representative.
2.4 Booting the System
VAX 4000 systems boot in one of two ways. You can configure the system
to autoboot on power-up or you can manually boot the system from console
mode. The Break Enable/Disable switch setting determines how the system
boots.
2.4.1 Autobooting the System
When the Break Enable/Disable switch is set to disable (the normal
operating setting), the system runs self-tests and, on completion, attempts
to load system software. Additionally, if the Break Enable/Disable switch
is set to enable, and the halt action
defined using the SET HALT command, the system will automatically
attempt to load system software.
Depending on whether or not a boot device has been selected, the system
loads system software or prompts you to select a boot device.
Loading System Software (with Boot Device Selected)
When a boot device has been selected, the system identifies the boot device
and the number 2 displays on the screen. As the system begins booting,
the countdown continues from 1 to 0.
2–6 VAX 4000 Model 200 (BA430) Operation
; SUBTEST_58_02, DE_SHAC_RESET.LIS
P3=0000000F
P4=00000000
P8=00000000
P9=00000000 P10=00000000
r2=00000000
r3=00004200
r7=20004000
r8=00004000 EPC=200618BC
or
REBOOT
RESTART_REBOOT
P5=00000000
r4=00000000
has been
Hide quick links:
Advertisement
Table of Contents
