6.4 Setting and Examining Parameters for DSSI Devices
For a tutorial on DSSI parameters and their function, refer to Section 6.4.3.
The following console commands are used in setting and examining DSSI device
parameters.
•
show device du pu
(Section 6.4.1)—Displays information for each DSSI device
on the system (du specifies drives, pu specifies storage adapters).
•
(Section 6.4.2)—Allows you to modify the following device parameters
cdp
from console mode: NODENAME, ALLCLASS, and UNITNUM. The
command automatically connects to the device's DUP server for all devices or
any number of specified devices.
6.4.1 show device du pu
The
show device du pu
system. The du argument lists all DSSI drives; the pu argument lists the storage
adapters for all DSSI buses found on the system.
Synopsis:
show device du pu
Example:
>>> show device du pu
dua0.0.0.0.0
dua1.1.0.0.0
dua2.2.0.0.0
dua3.3.0.0.0
pua0.7.0.0.0
pub0.7.0.1.0
>>>
Console device name:
command displays information for all DSSI devices in the
$2$DIA0 (ALPHA0)
$2$DIA1 (ALPHA1)
$2$DIA2 (ALPHA2)
$2$DIA3 (ALPHA3)
PIA0
PIB0
RF35
RF35
RF35
RF35
DSSI Bus ID 7
DSSI Bus ID 7
System Configuration and Setup 6–33
cdp