Running Uetp; Summary Of Uetp Operating Instructions - DEC 4000 AXP Service Manual

3.4 Running UETP

The User Environment Test Package (UETP) tool is an OpenVMS AXP software
package designed to test whether the OpenVMS AXP operating system is
installed correctly. UETP software puts the system through a series of tests that
simulate a typical user environment, by making demands on the system that are
similar to demands that might occur in everyday use.
Run UETP after system installation when OpenVMS AXP is running; or when
you need to run stress tests to pinpoint intermittent errors.
UETP is not a diagnostic program; it does not attempt to test every
feature exhaustively. When UETP runs to completion without encountering
unnrecoverable errors, the system being tested is ready for use.
UETP exercises devices and functions that are common to all VMS and OpenVMS
AXP systems, with the exception of optional features, such as high-level language
compilers. The system components tested include the following:
• Most standard peripheral devices
• The system's multiuser capability
• DECnet for OpenVMS AXP software

3.4.1 Summary of UETP Operating Instructions

This section summarizes the procedure for running all phases of UETP with
default values.
1. Log in to the SYSTEST account as follows:
Username: SYSTEST
Password:
Because the SYSTEST and SYSTEST_CLIG accounts have privileges,
unauthorized use of these accounts might compromise the security of your
system.
3–26 Running System Diagnostics
Caution