DEC 4000 AXP Service Manual page 173

Options:
[-i] Selective interactive mode, set all parameters.
[-n] Set device node name, NODENAME (alphanumeric, up to 6 characters).
[-a] Set device allocation class, ALLCLASS.
[-u] Set device unit number, UNITNUM.
[-sn] Set node name (NODENAME) for all DSSI drives on the system to either
RFhscn or TFhscn, where:
h is the device hose number (0)
s is the device slot number (0–3)
c is the device channel number (0)
n is the bus node ID (0–6).
[-sa] Set ALLCLASS for all DSSI devices on the system to a specified value.
[-su] Specify a starting unit number for a device on the system. The unit
number for subsequent DSSI devices will be incremented (by 1) from the
starting unit number.
Examples:
>>> cdp
pua0.0.0.0.0 ALPHA0
pua0.1.0.0.0 ALPHA1
pua0.2.0.0.0 ALPHA2
pua0.3.0.0.0 ALPHA3
>>>
Storage adapter device name
Node name (NODENAME)
System ID (SYSTEMID)—modified during warmswap.
Allocation class (ALLCLASS)
Unit number (UNITNUM)
Operating system device name
>>> cdp dua* -su 10
pua0.0.0.0.0 ALPHA0
pua0.1.0.0.0 ALPHA1
pua0.2.0.0.0 ALPHA2
pua0.3.0.0.0 ALPHA3
>>>
>>> cdp -sn
0411214901371 2 0 $2$DIA0
0411214901506 2 1 $2$DIA1
041122A001625 2 2 $2$DIA2
0411214901286 2 3 $2$DIA3
0411214901371 2 10 $2$DIA10
0411214901506 2 11 $2$DIA11
041122A001625 2 12 $2$DIA12
0411214901286 2 13 $2$DIA13
System Configuration and Setup 6–35