Show_Mop_Counter - DEC 4000 AXP Service Manual

3.1.10 show_mop_counter

The
show_mop_counter
Ethernet port.
Synopsis:
show_mop_counter [port_name]
Arguments:
[port_name] Specifies the Ethernet port for which to display MOP counters: eza0 for
Ethernet port 0; ezb0 for Ethernet port 1.
Examples:
show_mop_counter eza0
>>>
eza0 MOP Counters
DEVICE SPECIFIC:
TI: 211 RI: 34834 RU: 1 ME: 0 TW: 0 RW: 0 BO: 0
HF: 0 UF: 0 TN: 0 LE: 0 TO: 0 RWT: 33535 RHF: 33536 TC: 56
PORT INFO:
tx full: 0 tx index in: 2 tx index out: 2
rx index in: 3
MOP BLOCK:
Network list size: 0
MOP COUNTERS:
Time since zeroed (Secs): 4588
TX:
Bytes: 117068 Frames: 210
Deferred: 1 One collision: 32 Multi collisions: 15
TX Failures:
Excessive collisions: 0 Carrier check: 0 Short circuit: 0
Open circuit: 0 Long frame: 0 Remote defer: 0
Collision detect: 0
RX:
Bytes: 116564 Frames: 194
Multicast bytes: 16730668 Multicast frames: 36953
RX Failures:
Block check: 0 Framing error: 0 Long frame: 0
Unknown destination: 36953 Data overrun: 0 No system buffer: 18
No user buffers: 0
>>>
3–18 Running System Diagnostics
command displays the MOP counters for the specified