Table of Contents
Advertisement
82
Selenio X100
Installation and Operation Manual
Audio Inputs and Outputs
Inputs
Selenio X100 supports embedded-audio input, AES audio input, and analog audio input. In
addition, the X100 processes embedded audio from the SDI video input in SD, HD, or 3G
(Level A and Level B-DL) formats, and include two independent audio de-embedders—each
supporting sixteen mono channels. Any de-embedded group may contain compressed
audio, linear PCM, or a combination of both.
The X100 supports up to sixteen AES inputs.
Note: AES inputs can be disabled by the Green-Power Save control (Misc >
Green-Power Save). If an AES input is grayed out in the user interface, check its power
save status.
Outputs
The Selenio X100 outputs the following audio channels:
16 embedded channels to Embedder 1
16 embedded channels to Embedder 2
32 channels for up to 16 AES outputs
8 analog mono output channels
8 HDMI mono audio output channels
Additionally, up to 32 channels are available from the optional Advanced Audio Processing
block.
Any of these source channels can be routed to any destination.
No V-bit present
Audio V-Bit
=
= =
= V V
V-bit present
PCM present
Audio Format
T P
= =
Feedback
Alignment
No data
tone
present
present
Audio
present
present
Peak/Mute
A
= =
S
Status
No signal
Silence
present
present
Figure 3-31 Audio Status Parameters
D
Data
present
Peak
P
Advertisement
Table of Contents
