Table of Contents
Advertisement
150
Appendix B
Servicing
3
If necessary, detach the ribbon cable connector from the front panel control assembly by
pushing apart the two side clamps. and then wiggling the connector apart
CAUTION: Do not pull on the actual ribbon cable. This may result in damage to the
connector and or the ribbon cable itself.
Ribbon
cable
Figure B-5. Detaching Ribbon Cable Connector
CAUTION! Do not tilt the frame as you remove the cover. Damage may occur.
4
After you have completed servicing the unit, reverse steps 1 to 5.
2.
Gently wiggle and
lift up the ribbon
cable connector.
1.
Push apart the two
side clamps to unlock
the ribbon cable
connector.
(Figure
B-5).
Advertisement
Table of Contents
