Imagine Selenio X100 Installation And Operation Manual page 127

Table 4-7. Input Selection Mode Option Descriptions (Continued)
Option Notes
Stereo Detect If audio is present on the L/R pair of the 5.1 input, the Aux input is overridden. Information on
the C/LFE and Ls/Rs pairs of the 5.1 input is ignored.
If audio is present on the Aux input, the 5.1 input is overridden.

Aux Detect
This is an EAS application mode.

Inputs are 5.1 on AES1 (L/R), AES2 (C/LFE), AES3 (Ls/Rs), and EAS input on AES4

(L/R).
Output is 5.1 on AES1 (L/R), AES2 (C/LFE), AES3 (Ls/Rs).

When EAS appears on AES4 input, the output becomes EAS output on AES1 (L/R).

If audio is present on the 5.1 input, the Aux input is overridden.

Multi Aux
Stereo
If only L/R is present on the 5.1 input and audio is present on the Aux, the L/R is overridden.

If there is no audio present on C/LFE, Ls/Rs, or Aux inputs, source from L/R.

AES 1
AES 2
AES 3
AES 4
If 5.1 is present, take 5.1.

If there is no 5.1 or stereo available on either L/R or AUX, take AUX.

If stereo is only available on L/R, take L/R.

MultiMerge Scenario 1
Input (5.1)
L/R Yes
C/LFE Yes
LS/RS Yes
Aux No
Installation and Operation Manual
Scenario 2
Scenario 3
(Lt/Rt)
Yes (foreign Yes (foreign
language) language)
No No
No No
Yes (desired No
language)
Selenio X100 115