Table of Contents
Advertisement
2
Attach the brackets to the sides of the frame using the screws that are provided.
(See
Figure 2-3
on page 13.)
CAUTION
To prevent damage to components inside the frame, do not use screws longer than
those provided.
Figure 2-3 Bracket Installation
3
Attach the cable relief bar between the two support arms using the screws that are
provided.
You can secure the cable relief bar through any of the screw holes on the arm. (See
Figure 2-4
on page 13.)
Figure 2-4 Attaching the Cable Relief Bar
4
Push the Selenio X100 into the front of the rack, and attach the frame's front-mounting
ears to the rack using the appropriate screws (not provided).
5
Slide the two arms into their slots from the back of the frame and attach the arms to the
back of the rack
(Figure
2-5).
Selenio X100
Installation and Operation Manual
13
Advertisement
Table of Contents
