Led Functions; Video Output And Routing; Output Format - Imagine Selenio X100 Installation And Operation Manual

28
Selenio X100
Installation and Operation Manual

LED Functions

Video Output and Routing

Output Format

Table 3-2 LED Functions
LED
Condition Indicated
Name
Red:

System
X100 is powering up

Major fault has occurred, such as controller module failure, FPGA

failure, or submodule missing
Amber:

The X100 is powering up

A non-service fault is detected, such as a failed fan or power supply

Green: X100 is ready for operation

Off: The system is not powered

Red: Loss of signal on active input

Inputs 1
and 2 Amber: Errors are detected on an active input

Green: All inputs are error-free

Off: System LED is red

Red: Not applicable

TSG
Amber: Not applicable

Green: Test signal generator is operating

Off: Test signal generator is not enabled

Red: Genlock is enabled, but reference input is missing

Ref
Amber: Genlock is enabled, but reference is wrong standard

Green: Genlock is enabled and reference input is OK

Off: No Reference is enabled

Red: Alarm condition

Alarm
Amber: Not applicable

Green: Not applicable

Off: No Alarm function

Proc Ch 1 and 2 Out Format
Use these controls to select the output video format for processing channel outputs. The
Proc Bypass option bypasses the scalar and all processing (noise reduction, detail
enhancement, color correction, etc.) but is downstream of the frame synchronization. The
default is Follow Ref (external genlock source).