Imagine Selenio X100 Installation And Operation Manual page 24

12
Selenio X100
Installation
The following items are included:
Rear support arms (164-000306Q00)

Cable tie bar (164-000305Q00)

Brackets (164-100556Q00)

Bracket screws (4-40X1/4 PH_Q)

Tie bar screws (6-32X3/8 PH)

Rack Ears (164-100062Q00)

Note: The frame mounting ears and the rack support brackets are reversible. You can install
them with the ears at the front and support brackets at the rear, or with the ears at the rear
and the support brackets at the front.
Figure 2-1 Mounting Ears in Front Position
The following procedure describes how to install the rack supports.
1 Locate the support package in the box, consisting of two support arms, two brackets with
screws, a tie bar, and tie bar screws. (See
Rear support arms
Brackets
Figure 2-2 Rack Support Brackets
Figure 2-2.)
Tie bar screws
Cable tie bar