Table of Contents
Advertisement
If a version of LogoCreator already exists on the PC, ensure that you first uninstall the
program and restart the computer. Then proceed with the steps below:
1
Close all other software applications running on the PC and then insert the IconTools
CD-ROM into the computer's CD-ROM tray.
2
Using Windows Explorer, browse to the CD-ROM contents, and then double-click the
LogoCreator folder.
3
Double-click Setup.exe.
4
When the IconTools 3 Setup box appears, click Next, and then follow the on-screen
installation instructions.
Step 2: Convert Files to the .mg2 Format
Using LogoCreator, you need a source image file for the Fill portion of your logo, and a
source image file for the Key portion. The fill is the picture or image you want to overlay
onto the program output. The key is the cutout or shape of the desired logo, which may or
may not be the same shape as the fill. Using LogoCreator, you will set the fill and key
images to the same size (resolution) as the standard of the X100's output. LogoCreator
infers the key from the alpha channel in a targa (.tga) file.
After you save the logo, the logo displays in your LogoCreator workspace. To save your logo
files using LogoCreator, follow these steps:
1
In LogoCreator, open the Logo Set-Up dialog box (Figure 15 below).
When you first open LogoCreator, the Logo Set-Up dialog box opens automatically. If the
Logo Set-Up dialog box is closed, select File > New to open the dialog box.
Figure 3-17 LogoCreator Setup Dialog Box
Note:
If you click the Open button directly in the Logo Set-Up box, the program will only
launch files with a .mg2 prefix. If you attempt to open a file with any other prefix, the
program will generate error messages.
2
Click the Logo button to open the Static Logo dialog box.
3
Use the Logo ID box to assign the logo to a specific slot on your IconLogo system.
4
Enter a name for the logo in the Name box.
5
Click the Open button below the Logo Image Preview window.
The Open dialog box displays.
6
Select your existing logo file and click the Open button to open the logo in the Static Logo
dialog box.
Selenio X100
Installation and Operation Manual
59
Advertisement
Table of Contents
