Imagine Selenio X100 Installation And Operation Manual page 43

Channel 1
Tukay
The Wonder Dog!
ARC-Adjusted 4:3 Program
Program Output with Live I -Wings Sidebar Content
Figure 3-2 Creating the Live I-Wings Effect
Converter Fast Switch
The Converter Fast Switch mode makes it possible to switch between an HD-SDI signal
and an SD-SDI signal without sync problems. To enable this feature, select Video > Video
Output and Routing > Operation Mode > Converter Fast Switch. Then select your
input standards in Fast Switch Input HD Std Sel and Fast Switch Input SD Std Sel.
To use Converter Fast Switch mode, the same external video source will be routed to both
Processing Channel 1 and Processing Channel 2. The external video source can only be
switched between the selected Fast Switch Input HD Std Sel and Fast Switch Input SD
Std Sel. Internally, Processing Channel 1 is prepared to receive the selected HD signal, and
Processing Channel 2 is prepared to receive the selected SD-SDI signal. When the external
video source is switched to an HD-SDI signal, Processing Channel 1 is activated and
switched into. When the external video source is switched to a SD-SDI signal, Processing
Channel 2 is then activated and switched into.
Note: In Converter Fast Switch mode only a single output format is available for selection
for all SDI outputs.
When the X100 is in Converter Fast Switch mode, the Frame Delay, H-Phase, and
V-Phase for processing channel 2 must follow the Frame Delay, H-Phase and V-Phase
settings of Processing Channel 1. Once enabled, Converter Fast Switch takes effect in
70 ms + the existing frame delay.
This feature functions differently than the
Anamorphic 16:9 Animated Sidebar Content
Combined
Tukay
The Wonder Dog!
Frame Sync Fast Switch
Selenio X100
Installation and Operation Manual
Channel 2
on page 36.
31