Table of Contents
Advertisement
58
Selenio X100
Installation and Operation Manual
Basic Steps to Create
Step 1: Install LogoCreator Software
3
Click the Render Settings.
4
In the Render Settings dialog box, select one of the options below and then click OK.
For .via files used in InfoCaster:
Select Off for the Field Render option in the Time Sampling section.
Set the frame rate to 60 fps.
For .via files used in IconStation, G-Scribe, TitleOne, TitleMotion GS, or Channel ONE,
Selenio X100 requires the appropriate Field Render option:
For HD or PAL .via files, select Upperfield.
The resulting .via file is exported at 25 fps.
For NTSC .via files, select Lowerfield.
The resulting .via file is exported at 29.97 fps.
5
Click the Output Module Settings.
6
In the Output Module Settings dialog box, select the following output options for the .via
file, and then click OK.
From the Format menu, select Inscriber .via.
From the Channels menu, select RGB+Alpha.
From the Color menu, select either Matted (pre-multiplied) or Unmatted
(straight).
If necessary, use the Resizing and Crop panels to modify the way the .via is
exported.
7
Set the Audio Output to one of the following values to export a sidecar audio .wav file for
your .via file (optional).
On: A sidecar audio file is always exported.
Auto: A sidecar audio file is only exported if the composition has audio elements.
The audio file is exported to the same location as the .via, and it uses the same
filename.
8
In After Effects, under the Output options, enter a name and location for the rendered .via
file.
9
Click Render to render the VIA file to the entered location.
Static
If you are starting with existing graphics files, these basic steps are described in the
following pages:
1
Install the LogoCreator conversion software in your PC.
2
Convert the logos to a .mg2 format.
All logos used by the X100 must either be generated as .mg2 files, or converted to that
format. LogoCreator software is contained in the Icon application, found in the Imagine
Communications Manuals and Product Resources DVD.
For best results, LogoCreator requires a PC with the following system specifications:
Intel Pentium III processor at 500 MHz or faster
512 MB or more of physical memory (RAM)
Microsoft® Windows® XP, Windows 2000, Windows Vista, or Windows 7
Logo Files
Advertisement
Table of Contents
