Table of Contents
Advertisement
76
Selenio X100
Installation and Operation Manual
Table 3-9
Audio Embedding Error Description (Continued)
Options
Description
OverWrite
Attempts to overwrite existing audio data and control packets of the
same group number with the new audio data (see
Embedding
Auto
Attempts first to overwrite existing audio data and control packets of the
same audio group number; failing that, it appends the new audio data
and control packets immediately following the last existing audio data/
control packet.
Append Embedding
When you select Append embedding, the Selenio X100 attempt to insert the audio data
and control packets immediately following the last existing data/control packet in the
horizontal ancillary data space (ADS). Append embedding is only valid if the audio group to
be embedded does not already exist.
Figure 3-21
shows how append embedding appears in the ancillary data space when there
is no previous audio or other data.
ADS before embedding
EAV
ADS after embedding group 1
EAV
Group 1
Figure 3-21 Append Embedding Mode; Adding Group 1 When No Other Data is
Present
When ancillary data exists in the ancillary data space, appended audio appears following
that data, as shown in
Figure
ADS before embedding
Other
Other
EAV
Ancillary Data
Ancillary Data
A
B
ADS after embedding group 1
Other
Other
EAV
Ancillary Data
Ancillary Data
B
A
Figure 3-22 Append Embedding Mode; Adding Group 1 When Ancillary Data is
Present
If you attempt to insert audio into Group 1 when Group 1 audio data already exists in the
ancillary data space, an error is returned, as shown in
on page 78)
3-22.
Group 1
Figure
Overwrite
3-23.
Advertisement
Table of Contents
