Front Panel Control Assembly
For fan replacement or control panel servicing, continue with the following steps to remove
the front cover.
1
Remove the 9 screws from the front cover (including top and bottom), but do not remove
screws from the side mounting ears
Remove five screws from
the top of the front panel
control assembly.
Figure B-3. Removing Screws on the Front Panel Control Assembly
2
On a level surface, gently slide the front cover control assembly forward
you can comfortably reach the ribbon cable connector (DO NOT allow the front assembly to
drop).
Figure B-4. Sliding Front
(Figure
Remove five screws from the bottom of the
front panel control assembly.
Panel Off
Installation and Operation Manual
B-3).
Slide the front panel out.
Selenio X100
149
(Figure
B-4) until