Fader; Meters-Fader Popup - Euphonix Max Air Manual

Euphonix Max Air Mixing Console Operation Manual
4.11.3

Fader

Select the Fader tab to display the Meters-Fader View. This configures the meter display
next to the fader (Figure 4-44).
Select a Strip button from the Strips section. Use the Main or Center tabs and the Select
All, Select None, Select Range to assist your selection (page 75). Touch a Meter Dis-
play button to configure the selected Strip.
• Fader
: The Main or Swap channel is displayed, depending upon the state of the
strip's Swap button. When the Swap button is pressed to change from the Main to
Swap channel, the meter follows this change.
• Fader with Gain Reduction
reduction.
• Main and Swap
and right meters respectively, regardless of whether the Swap button is pressed or
not.
• None
: No meter is displayed.
Figure 4-44

Meters-Fader Popup

: The Main or Swap channel is displayed with gain
: The Main and Swap channels are always displayed in the left
87
Touchscreen