Assigning The Mic Preamps To Hubs - Euphonix Max Air Manual

Euphonix Max Air Mixing Console Operations Manual
5. Select Frame1-2 and touch Rename Port. Type Analog 1-24.
6. Frame1-3 and touch Rename Port. Type Digital In 1.
Select
7. Select Frame1-4 and touch Rename Port. Type Digital In 2.
8. If any of the MADI inputs are not connected, rename them
keyboard commands <Ctrl-C> and <Ctrl-V> to copy and paste UNUSED to save
time.
3.2.2

Assigning the Mic Preamps to Hubs

In the above example the first MADI input port is used for the Mic Preamps. The patch
system must be informed which MADI input each Mic Pre (ML530 or AD924 equipped
IO93 frame) connects to so their input controls appear on the corresponding input chan-
nel knobset.
1. In the Patch view, select the
2. Select MADI Out Ports from the list on the left.
These refer to the MADI output of external mic preamps, either directly, such as
from an AD924 equipped IO93 frame, or indirectly, such as from an ML530 via an
AM713 converter. In our example, we only have one.
3. Select the green
It is displayed in the Sources list on the right.
4. MADI In Ports from the list on the left.
Select
5. Select the blue
It is displayed in the Destinations list on the right.
6. Touch Patch Selected to make the connection.
The console now knows how the mic/line interface is connected so the proper input con-
trols appear at the top of the channels they are connected to.
Because Frame1-1 has been designated as a MADI connection to the Mic/Line interface,
selecting the Frame1-1 sub-category in Sources shows Device Patch in the channels that
are connected to a Mic Pre and will not allow selection unless the "Cabling" patch we
made earlier is removed, thereby declaring that these channels are not connected to a
Mic Pre.
Cabling tab.
MADI Out box next to Mic1 Port.
MADI In box next to Frame1-1.
29
Quickstart to Common Tasks
UNUSED. Use the