Channel Select Key; Solo Key; Copy And Paste; Rotary Knobs - Euphonix Max Air Manual

Euphonix Max Air Mixing Console Operation Manual
Channel On Select Key
The Select key is used to include the channel On key in copy and clear operations.
5.2.7

Channel Select Key

The Chan Select key is used:
• to include the entire channel in a copy or clear operation.
• in conjunction with the
5.2.8

Solo Key

The Solo key is used to solo the active channel (page 142).
5.2.9

Copy and Paste

Settings from one channel may be copied and pasted to others.
To copy the settings:
1.
Press and hold the
The strip dims and the Copy key flashes.
2. Press the
key at the top of the strip to copy that function to the copy buffer. Other functions
can be added to the buffer by pressing their Knobset Select keys.
3. Press and hold the
and exit the mode.
To paste the settings to a new channel:
1. Select the Swap or Main channel within the desired strip.
2. Press and hold the
The buffered information is pasted to the channel on the new strip.
5.2.10

Rotary Knobs

Each strip has four rotary knobs each with a four-character display and two keys. The
knob is a continuous controller; as the knob turns, the LEDs on the outer ring light. The
display shows the knob's current function or parameter value.
• The lower key to the left of the knob toggles the knob's function
• The upper key to the left of the knob is the
it. This key is also used to select the On/Off key for inclusion in a Snapshot and
Wave key to assign channels (page 92).
Wave key down and press the Copy key.
Chan Select key to select the entire channel, or press any Knobset Select
Wave key down and press the Copy key to stop it from flashing
Wave key down and press the Paste key on the new channel.
96
Channels and Strips
In/Out.
Select key for the In/Out key below