Monitors; Monitor Routing - Euphonix Max Air Manual

Euphonix Max Air Mixing Console Operations Manual
3.8

Monitors

Setting up the monitors is the final step to getting sound to the speakers. Note that only
certain monitor outputs can handle surround outputs.
Externals Main Sections Aux Snds
Out
Monitor Selector
Control Room Monitors
1.
Press the
the surface.
2. Select the
3. Select the appropriate source from the screen.
In our example the fifth Main section should be labeled Prog and has the main
program output.
The three buttons labeled Main Spkrs, Alt 1, and Alt 2 allow using three different
speaker sets in the control room.
Monitor A–D
The four speaker sets labeled Mon A–D can be used for additional monitoring including
green room feeds, floor foldback, etc. Setup is simple: press the Setup button at the top-
right of the Super Channel section to bring up the source options for these monitors.
Rtn
8 Out (max 7.1)
Figure 3-3

Monitor Routing

Setup button in the Control Room Monitor area of the Super Channel on
CR Source tab.
42
Quickstart to Common Tasks
8 Out (max 7.1)
6 Out (Max 5.1)
CR
Monitors
8 Out (max 7.1)
Main
Alt 1
Alt 2
Stereo
Mon A
Mon B
Stereo
Mon C
Stereo
Mon D
Stereo