Backstop Pfl; Soft Knobs; Cm404 Soft Knobs - Euphonix Max Air Manual

Euphonix Max Air Mixing Console Operation Manual
1. Touch the
2.
Select the channels or strips from the Solo-Safe popup (Figure 7-19) to be made
Solo-Safe.
The channel's Solo key lights dimly when in Solo-safe mode.
3. Press Close to exit the popup.
7.5.8

Backstop PFL

The Max Air faders have a backstop PFL switch past the bottom of their travel. Select
Enable Backstop PFL (5 in Figure 7-18) to enable this feature. Pull a fader past the
bottom of its travel to route the signal's PFL level to the solo bus. Releasing the fader
cancels that fader's routing to the solo bus. Backstop PFL does not affect normal solo
operations and can be used on group and master faders to PFL a group of channels. De-
activating Enable Backstop PFL cancels the mode.
7.6

Soft Knobs

A variety of different channel and bus master functions can be assigned to the Soft
Knobs. They are most commonly used to control the Aux busses of the channel assigned
to the Super Channel.
The two keys to the left of each knob are used identically to the keys next to the knobs
in the channel strip.
The ▲ and ▼ page keys are provided to accommodate more than 16 parameters for a
function. These keys scroll through a full page of 16 knobs at a time. Press the ▼ key to
scroll to the next page and the ▲ key to scroll to the previous page.
Solo Safe button (6 in Figure 7-18) in the Solo Setup popup.
Figure 7-20

CM404 Soft Knobs

145
Center Section
Soft Knobs
Aux Aux
Masters Sends
Group Bus
Masters *
Main
Masters
To
Faders
Function
Setup
Select