About - Euphonix Max Air Manual

Euphonix Max Air Mixing Console Operation Manual
Safety
The Safety section includes two buttons that can be set independently:
• Bus Lock
Master, Master Trims, and Leg Trims), Bus Inserts, Bus On/Off keys.
While these functions are disabled, their values may still be interrogated.
• Monitor Lock
always remain active.
Clock Source
The on-screen clock can be set to Internal or External.
Select External to synchronize to a facility "Time of day" type clock using LTC.
1. Connect LTC to the LTC input of the system MIDI interface.
2. From the
3. Set the
4.
Select the desired display format from
Clock Display Format
Allows the clock to be displayed in three formats: 12, 24 hour, HH:MM:SS:FF.
Delay Display Format
Allows the delay time units to be displayed in three formats: samples, frames, or sec-
onds
Misc
Group Bus as Mix Minus: Activating this button inverts the group bus assignment in-
dicators so channels NOT assigned to the bus are lit.
Show Router Names: This enables the router mnemonics feature (see page 58).
4.6.5

About

Select the About button in the lower-right corner of the System View to display software
version information and a Shutdown button. Touching the Shutdown button does not
prompt you to save changes, so be sure to save before exiting the program (see Opera-
tions on the Current Title on page 52). You can also use the keystrokes Ctrl-Alt-* simul-
taneously. The * is from the numeric keypad not Shift-8.
: Disables the following functions when activated: Bus Levels (Main
: Disables the Control Room and Monitor levels. Dim and Cut
Main Menu, press System.
Clock Source to External.
Clock Display Format.
73
Touchscreen