Dynamics; Fader; Super Channel: Dynamics - Euphonix Max Air Manual

Euphonix Max Air Mixing Console Operation Manual
7.1.7

Dynamics

This area provides control over the most commonly used dynamics parameters for the selected
channel.
Dyn Dyn
Comp
Exp / Gate
5
Dyn In Dyn In In In
2
1
The Dyn In key (1) toggles the entire Dynamics section in/out. The Dyn Edit key (5)
toggles the knobs and In key (2) between controlling the compressor or expander/gate.
The In key (2) toggles either the compressor or expander/gate (whichever is selected)
in/out. The knobs control Attack, Release, Depth, Threshold, Ratio, and Gain (used only
when compressor is selected).
The Soft Knobs key (3) maps all dynamics parameters (including those not shown on
the Super Channel) onto the Soft Knobs. The Dyn Select (4) key selects the entire Dy-
namics section for a Clear function.
7.1.8

Fader

Although there is no dedicated hardware fader to control the channel selected for the
Super Channel, any CM404 center section strip can be assigned to control the Super
Channel. Use the Touchscreen to configure a strip to follow the Super Channel (see page
72). This assigns the channel selected for the Super Channel to that strip.
Attack Attack
Threshold Threshold
Figure 7-5

Super Channel: Dynamics

131
Release Release
Ratio Ratio
Center Section
4
Depth Depth
Dyn Dyn
Select Select
Soft Soft
Knobs Knobs
3
Gain