Cabling - Euphonix Max Air Manual

Euphonix Max Air Mixing Console Operation Manual
4.3.3

Cabling

This category handles MADI cable connections for the ML530 Mic/Line Interfaces.
NOTE: The following ML530 cabling and patching operations also apply to the Modu-
lar I/O remote-controlled preamp. Each Modular I/O frame can contain from
4 to 32 preamp channels.
Mic/Line Interface Patching
For mic inputs and analog inputs not at +4 dB, the Euphonix ML530 provides 24 preamps
each with gain, phantom power, high-pass filter, and hiz/loz switching. The ML530's
analog outputs are connected to an AM713 Analog to MADI converter which then con-
nects to one of the MADI inputs.
The patch system must be informed which MADI input each ML530 connects to so their
input controls appear on the corresponding input channel knobset. Note how each Mic/
Line Interface is connected.
In the example that follows, the MADI output from the Analog to MADI converters
of two ML530 Mic/Line interfaces have been connected to the inputs of Frame1-1 and
Frame1-2.
NOTE: We recommend patching each ML530 channel to only one channel input.
60
Touchscreen