Assign Channels To Strips - Euphonix Max Air Manual

Euphonix Max Air Mixing Console Operation Manual
5.1.1

Assign Channels to Strips

Each strip can control a Main and Swap channel. One or both of the channels can be a
Control Group Master or Multi Format Master instead of a normal channel (see Chapter
8: Control Groups and Multi Format Masters). Channels can be assigned individually
using the strip controls or to multiple strips using the Surface - Assign View (see Chan-
nels on page 74) from the Touchscreen.
Surface Assign View
The Surface - Assign View on the Touchscreen is most commonly used to assign chan-
nels to multiple strips but can also be used for a single assignment.
1. Channels from the Main Menu buttons.
Select
2.
Select the
3. Surface Assign View, select the channel to assign from the Channels bank.
In the
4. Select the strip to assign the selected channel to from the
Assign tab.
Figure 5-2 Surface Assign View
91
Channels and Strips
Strips bank.