Stereo Input Knobsets - Euphonix Max Air Manual

Euphonix Max Air Mixing Console Operation Manual
Stereo Controls
There are two additional controls used for stereo channels (see Multi Format Master
Channels on page 154).
• Balance
hear more of their right channel. Rotate left or right until the display reads 100L or
100R to hear only the left or right channel.
• Left-to-mono
equally to both the left and right sides of the stereo channel.
• Right-to-mono:
equally to both the left and right sides of the stereo channel.
• Both-to-mono:
channels equally to both sides of the stereo channel. The Bal knob then adjusts the
mix between left and right channels.
• Swap: Press the lower key to reverse the left and right channels.
Page 1
HiZ
Select
On/Off
On
48v
Select
On/Off
On
HPF
Select
On/Off
On
Gain
Select
A Input
B Input
On
Copy Paste
: Rotate the Bal knob left to hear more of the left channel; rotate right to
: Press the upper key next to the Bal knob to send the left channel
Press the lower key next to the Bal knob to send the right channel
Press both keys next to the Bal knob to send a mono mix of both
Page 2
Trim
Select
On
Bal
Select
Left to Mono
Right to Mono
On
Dly
Select
On/Off
On
Inpt
Select
Mic Gain
On
Copy Paste
Figure 5-9

Stereo Input Knobsets

100
Page 3
Swap
Select
Input Trim
On/Off
On
Select
Balance
On
Aphs
Select
Delay
On/Off
On
Bphs
Select
Input Select
On/Off
On
Copy Paste
Channels and Strips
A Input Phase
B Input Phase