Euphonix Max Air Manual page 173

Euphonix Max Air Mixing Console Operation Manual
Next, we must create an Event to open the relay (turn the "On-Air" light off) when
none of the mic channels are tracked (see Figure 11-5):
1. Touch the
2. In the Event List area, touch <Press to Add Event> and type something descrip-
tive in the keyboard popup.
3. Inputs area, touch the <Press to Add Input> and select OnAir from the
In the
Add Input Event popup.
4. Enter the following values:
Start Channel
End Channel
Activation Level
Activation State
5. In the Outputs area, touch the <Press to Add Output> field and select GPO from
the Add Output Event Popup.
6. Enter the following values:
Output Number
Active State
Pulse Length
Machine
7. At this point, while none of channel "1" thru 8 are tracked (all fader below -72 or
OFF), GPI output 1 is latched open.
8.
An output action can be added to simultaneously unmute a floor monitor attached
to one of the console's Monitor outputs. Create another Output and select Con-
trol Room. In the properties area, select values "Monitor A" and "On."
Events Main Menu button to display the Events View.
1
8
-72
Mute
1
open
0
GP132 One
173
Event System