Label Individual Signals; Label Destination Ports And Signals - Euphonix Max Air Manual

Euphonix Max Air Mixing Console Operations Manual
3.2.3

Label Individual Signals

From the Patch view:
1.
Select the
2. Select Mic Line 1 from the list on the left.
3. Select Rename Port and enter Mic 1-24 using the keyboard popup.
This enters meaningful names into each of the 24 mic input name slots.
4.
Each mic can now be individually named. Touch the first beige box in the
column that shows Mic 1-24-1. Use the keyboard popup to rename it Mic 1 and
hit the "Enter" key. You can use the hardware keyboard's down arrow to tab to the
next name field.
5.
Touch the gray
originally labeled Frame 1-2).
6. The names in the beige Name list can now be changed to reflect the actual sources
connected to these 24 analog inputs (e.g. VTRA1, VTRA2, TEL1, etc.).
7.
Touch the gray
dividual digital inputs from the third MADI port. Do the same for the fourth Hub
input we earlier named Digital In 2.
3.2.4

Label Destination Ports and Signals

Select the Destinations tab to name the output MADI ports and their individual sig-
nals. Their names will depend on how these MADI ports are connected to the outside
world. In the system diagram (Figure 1-1), four ports are shown. One of these ports is
always used for the monitor outputs that connect to the MC524 Monitor Interface so
only three ports appear in the destinations list as Frame1-1, Frame1-2, Frame1-3. In the
above example, Frame1-1 is connected to 24 analog outputs, the other two to 56-channel
digital format converters. Rename the Frame1-1, Frame1-2, Frame1-3 ports and their
individual signals.
Sources tab.
Analog 1-24 button (the second gray button from the top-left,
Digital In 1 gray button (the third from top-left) to rename the in-
30
Quickstart to Common Tasks
Name