Knobsets; Creating A Custom Knobset For Mono Channels - Euphonix Max Air Manual

Euphonix Max Air Mixing Console Operations Manual
3.6

Knobsets

Knobsets allow users to customize the four rotary controls on the surface to suit their in-
dividual requirements. There are six buttons at the top of each strip (Pan, Filt, EQ, Dyn,
Inp and *) that determine which parameters the knobset controls. In this example, we
will configure the * custom knobsets for mono and stereo channels. From bottom to top,
we will configure mono channels to have mic gain, pan, aux 1 and aux 2. Stereo channels
will have line trim, balance, aux 1 and aux 2.
3.6.1

Creating a Custom Knobset for Mono Channels

1. System from the Main Menu.
Select
2.
Select the
The * in front of Knobset in the tab indicates that this custom set of knobs is acces-
sible by pressing the * key at the top of each channel strip.
3. The view shows two boxes, the one on the left is a set of rotary controls and keys
found on the strip. The boxes on the right are buttons that indicate the channel
functions.
4. Select the bottom box on the left.
It highlights yellow to show it is selected.
5.
Select the
The grid on the right shows all input functions of the channel strip.
6. Select the A input
There are two inputs per channel each with Impedance, 48 V phantom, High-Pass
Filter, Mic Gain, digital input Trim, and Phase controls. The Delay settings and the
Input key (between the A and B Inputs) are common to both inputs. Note that the
Impedance, 48 V phantom, High-Pass Filter, and Mic Gain controls appear only
on channels that have been connected to a Mic Preamp (Channels 1–24 in the ex-
ample at the beginning of the Quickstart).
You have just configured the Mic Gain control to appear on the bottom control on
the channel strip when the * key is selected on any strip.
7.
Repeat the above steps choosing Pan F (Front pan) for the panner and Aux 1 and
Aux 2 for the auxes. From bottom to top the four knobs will show Mic Gain, Pan,
Aux 1 and Aux 2.
8. By paging to the next set of knobs using the arrow keys at the top you can set a
total of 16 custom knobs.
*Knobset tab.
Input function in the middle column.
Gain situated in the bottom-left of the bank of buttons.
39
Quickstart to Common Tasks