Knobset; Knobset View - Euphonix Max Air Manual

Euphonix Max Air Mixing Console Operation Manual
4.6.2

*Knobset

Select the *Knobset tab from the System View. The *Knobset View allows a custom-
ized set of 16 knob parameters to be displayed on the Strip when the channel's * key is
pressed at the top of the Strip.
1. Select the page (1 in Figure 4-26) and knob position (2) for the function parameter
from the Custom (*) Knobset area on the left.
2.
Select a
3.
Select the parameter from the
4. Repeat for each of the four knob positions and pages.
The Fader button can be used to put the Swap channel's fader on a knob. This can pro-
vide simultaneous control of the Main and Swap fader level controls.
1
2
Figure 4-26
Function from the center of the View (3).
Function Parameters section on the right (4).
3

*Knobset View

70
Touchscreen
4