Keypad; Cm404 Keypad - Euphonix Max Air Manual

Euphonix Max Air Mixing Console Operation Manual
7.8

Keypad

The keypad is used to recall Layouts, Snapshots, custom (*) channel strip Knobset pag-
es, trigger Custom events, or recall channels to the Super Channel.
Press the Layouts, Snapshots, Knobsets, or Custom keys to recall those respective
functions. That key remains active (lit) until another key is pressed or that key is pressed
again. If none of the four keys are lit, then the keypad assigns a channel to the Super
Channel.
If the One Shot key is off, the keypad acts as a normal numeric keypad. Press the desired
number and then press the Enter key. Press Clear to cancel all entered numbers. The
numbers display in the lower-right Keypad area of the Touchscreen.
If One Shot is on, the 1–9 keys immediately recall without pressing Enter. The Keypad
area of the Touchscreen shows the first nine layouts, snapshots, custom knobset pages,
or Custom key names.
Layouts Snapshots Knobsets
7 8 9
4 5 6
1 2 3
Clear 0 Enter
One Shot Setup
Figure 7-23

CM404 Keypad

148
Custom
Center Section