Scene Menu; Add Scene; Insert Scene; Delete Scene - Euphonix Max Air Manual

Euphonix Max Air Mixing Console Operation Manual
10.1.2

Scene Menu

To access the Scene Automation Operations window, first select Events from the Main
Menu buttons, then select the Scenes tab. If there are no Scenes, select Add Scene or
Insert Scene to create a Scene to edit.
In the Scene List, the currently selected Scene's parameters are shown in the Scene
Parameters display. Parameter values may be edited by selecting the boxes on the right-
hand side of the display. Use the keyboard popup to change the values.
• Name
- Enter up to 15 alphanumeric characters for the Scene Name.
• Glide Time
lution is a tenth of a second. Typical Glide Times (crossfade) are 1, 2, 5, and 7
seconds.
• Snaphot #
• Auto Follow
List is desired. Otherwise set to "Off."
• Auto Follow Time
amount of time between the start of the current Scene and the start of the next
Scene. The default Auto Follow Time is 2.0 seconds. The resolution of the Auto
Follow Time is a tenth of a second.
The Scene ID cannot be edited. This number is automatically created with the Scene and
does not change.
10.1.3

Add Scene

Add Scene creates a new Scene at the end of the Scene List. The Glide Time and Auto
Follow status of the previous Scene is automatically entered in the new Scene.
10.1.4

Insert Scene

Insert Scene inserts a Scene after the currently selected Scene. The Glide Time and
Auto Follow status of the previous Scene is automatically entered in the newly inserted
Scene.
10.1.5

Delete Scene

Delete Scene deletes the currently selected Scene.
10.1.6

Take

Take executes (fires) the current Scene. Navigate to the Scene in the Scene List with the
Next or Previous buttons, and press the Take button. As soon as the Scene starts, the
"scene cursor" moves to the next Scene in the list. This allows pressing Take over and
- Enter a Glide Time from 0 to 1000 seconds. The Glide Time reso-
- Enter the number of the Snapshot to be recalled with the Scene.
– Set to "On" if automatic increment to the next Scene in the Scene
– This parameter is used if Auto Follow is enabled. Enter the
163
Scene Automation