Configuring Aux Busses; Aux To Faders; Aux Bus Settings View - Euphonix Max Air Manual

Euphonix Max Air Mixing Console Operation Manual
6.3

Configuring Aux Busses

Select the Busses Main Menu button, then select the Aux tab to display the Aux Bus
Settings shown in Figure 6-4. Each button pertains to a specific Aux function, which is
discussed in the following sections.
NOTE: The number of Aux busses (4 or 24) depends on the Mixer Model.
6.3.1

Aux to Faders

It is now possible to control a selected Aux bus from the faders. Aux busses now have 12
dB of gain to match the range of the channel fader.
1. Touch the
The button illuminates.
2. Touch the desired Aux bus to map onto the faders.
The button illuminates.
3. When finished, select another Aux or select a different Aux function.
This stays enabled if you navigate to a different Touchscreen so touch Aux to Fad-
ers again to disable when finished.
This effects all channels including those not on the surface.
Figure 6-4

Aux Bus Settings View

Aux to Faders button.
116
Busses