Sharp AR-BC260 Service Manual page 77

<4> FD paper exit roller A
1) Remove the cabinet.
2) Remove the paper exit unit.
3) Remove the E-ring, (A), the screw, (B), (C), and the bearing.
Remove the unit (D).
D
A
4) Remove the E-ring and the bearing, and remove the FD paper
exit roller A.
C
B
AR-BC260 DESCRIPTIONS OF EACH SECTION 7 - 40
e. Gate solenoid unit
1) Open the left door, and remove the rear cabinet and the rear
left cabinet.
2) Remove the driver PWB unit.
3) Remove the connector and the screw, and remove the gate
solenoid unit.
f. Lift-up unit
1) Remove the rear cabinet and the rear right cabinet.
2) Remove the power PWB unit.
3) Remove the connector and the screw, and remove the lift-up
unit.