Sharp AR-BC260 Service Manual page 144

Code
Function (Purpose)
Main Sub
26 52 Used to set YES/NO of count up of
non-copy paper (cover or insertion
paper).
53 Used by the user to set Enable/
Disable auto color calibration (auto
adjustment of color balance and
density)
54 Used to set enable/disable of auto
color calibration for the printer.
57 Used to set the model name for use
as the status information.
65 Used to set the finisher alarm mode. Setting
69 Used to set the operation
specifications in case of toner
cartridge life near end.
72 Used to set disable/enable of the
high image quality mode in BW copy.
27 1 Used to set the specifications for
operations in case of communication
trouble between the host computer
and MODEM (machine side). (When
communication trouble occurs
between the host computer MODEM
and the machine, the self diag
display (U7-00) is printed and setting
for inhibition of print or not is made.)
5 Used to enter the machine tag No.
(This function allows to check the tag
No. of the machine with the host
computer.)
30 1 Used to check the operation of
sensors and detectors in the paper
feed, paper transport, paper exit
sections and the related circuits.
2 Used to check the operation of
sensors and detectors in the paper
feed section and the related circuits.
(The operation of the paper feed
sensors and detectors can be
monitored with the LCD display.)
33 1 Used to check the operation of the
card reader and the sensors and the
related circuits. (The card reader
sensor operation can be monitored
with the LCD display.)
40 1 Used to check the operation of the
manual feed tray paper size detector
and the related circuit. (The
operation of the manual feed tray
paper size detector can be monitored
with the LCD display.)
2 Used to adjust the manual feed tray
paper width detector detection level.
7 Used to enter the adjustment value
of the manual paper feed tray paper
width detector detection level.
(Setting)
41 1 Used to check the operation of the
document size sensor and the
related circuit. (The operation of the
document size sensor can be
monitored with the LCD display.)
Sensor ON/OFF check
2 Used to adjust the document size
sensor detection level.
3 Used to check the operation of the
document size sensor and the
related circuit. (The document size
sensor output level can be monitored
with the LCD display.) Current
sensor (A/D) value
43 1 Used to set the fusing temperature in
each operation mode.
4 Used to set the fusing temperature
for each paper.
Purpose
Setting
Setting
Setting
Setting
Setting
Setting
Operation test/check Communication (RIC/
MODEM)
Setting Communication (RIC/
MODEM)
Operation test/check
Operation test/check Paper feed
Operation test/check Others
Operation test/check Paper feed
Adjustment Paper feed
Setting Paper feed
Operation test/check Others
Adjustment Others
Operation test/check Others
Setting Fixing (Fusing)
Setting Fixing (Fusing)
AR-BC260 SIMULATION 9 - 6
Section
Specifications
Specifications
Specifications
Specifications
Specifications
Specifications
Specifications
Specifications
Data
Operation
Operation
Operation
Operation
Operation
Specifications
Operation
Operation
Operation
Operation
Operation
Item
Operation mode
Operation mode
Operation mode
Operation mode
(Common)
User data