Sharp AR-BC260 Service Manual page 201

Display Content
D MULTI Print quantity
COUNT
E PAPER Paper feed tray selection
(MFT, CS1,CS2, CS3,
CS4, LCC)
F EXIT TRAY Paper exit tray selection
(R, S)
63
63 -01
Purpose Adjustment/Setting/Operation data output, check
(display, print)
Function Used to check the result of shading correction. (The
(Purpose) shading correction data are displayed.)
Section Scanner (Exposure)
Item Operation
Operation/ Used to display the latest shading correction result.
Procedure Data for each color can be separately checked with
the color keys.
1. Select the color to be set with the color keys (CMY).
2. The display page can be shifted with the scroll key.
(Display item)
GAIN ODD Gain adjustment value (ODD)
GAIN EVEN Gain adjustment value (EVEN)
OFFSET ODD Offset value (ODD)
OFFSET EVEN Offset value (EVEN)
SMP AVE ODD Reference plate sampling average value
(ODD)
SMP AVE EVEN Reference plate sampling average value
(EVEN)
TARGET VALUE Target value
BLACK LEVEL Black output level
ERR CODE Error code (0, 1-4, 11-14)
0: No error
1: STAGE 1, exceeded number of loops
2: STAGE 2, the target value is less
than the specified level.
3: STAGE 3, the gain set value is
negative.
4: END is not asserted.
∗
Add +1- to the error code in color
mode.
RSPF WHITE White reference level of the document
LEVEL 1ST feeder unit in the first scanning
RSPF WHITE White reference level of the document
LEVEL 2nd feeder unit in the second scanning
Min. Max. 63
Default
Value Value
Purpose
1 999 1
Function
(Purpose)
1 6 2
Section
(CS1)
Item
1 2 1 (R) Operation/
Procedure
63
Purpose
Function
(Purpose)
Section
Item
Operation/
Procedure
(
1/5
2/5
3/5
63
Purpose
4/5
Function
4/5
(Purpose)
Section
Item
Operation/
Procedure
5/5
AR-BC260 SIMULATION 9 - 63
-03
Adjustment
Used to adjust the CCD color balance (gamma).
Scanner (reading)
Picture quality
Set the SIT chart (UKOG-0280FCZZ) on the
document table, and press the [EXECUTE] key. The
color coefficient automatic adjustment pattern
reading is started to calculate and display the color
coefficient data.
The color coefficient data of each color can be
displayed with the color key.
-05
Setting
Used to set the CCD color balance (gamma) default.
Scanner (reading)
Picture quality
1. Press the [EXECUTE] key, and the [YES] and
[NO] keys become active.
2. When the [YES] key is pressed, the CCD color
balance value is set to the default.
-06
Adjustment/Operation data output check (display,
print)
Used to check the color balance (gamma) check
patch.
Image process (ICU)
Picture quality
1. Set the color balance check patch printed with
SIM 46-21 on the document table.
2. Press the [EXECUTE] key, and the reading is
started and the data are displayed on the display.
Color balance
Color balance
Color balance