Sharp AR-BC260 Service Manual page 215

67 -28
Purpose Adjustment
Function Used to reset the scanner target value (for servicing)
(Purpose) in the printer engine automatic density adjustment to
the standard value. (Reset to the standard value of
SIM67-27. (The value is reset to the factory setting.))
Operation/ The registration target value set with SIM67-27
Procedure (Printer engine automatic density adjustment
scanner target value (for servicing) display &
registration) is reset to the standard value.
1. Press the [EXECUTE] key.
2. Select [YES]. (If [NO] is selected, the display returns to the
initial display.)
The value is reset to the standard value, and the data are
saved to the backup area.
67 -29
Purpose Setting
Function Used to set the printer screen mode.
(Purpose)
Operation/ 1. Select a set item with the scroll key.
Procedure 2. Enter a set value with the 10-key.
3. Press the [OK] key.
Printer screen selection. When DEF is 0, it is the same as the
conventional screen. When DEF is 1, it is an option screen with
improved grainy. (However, the number of lines of the screen is
reduced.)
Item
A 4BIT PHOTO AREA 0:PHOTO1 1:PHOTO2
B 4BIT GRAPHICS AREA 0:GRAPHICS1
1:GRAPHICS2
C 4BIT CAD SCREEN 0:CAD1 1:CAD2
Set
Content Default
range
0 – 1 1
0 – 1 0
0 – 1 1
AR-BC260 SIMULATION 9 - 77
67 -40
Purpose Setting
Function Used to copy the scanner destination. (Flash writing)
(Purpose)
Section Flash ROM (Scanner)
Item Data
Operation/ 1. Insert a new ROM of copy destination into the
Procedure socket of the firm ROM.
2. Insert the copy source ROM into the font ROM
socket.
3. Press the [EXECUTE] key.
4. ROM data initializing, writing, and verifying are
performed.
∗
When the result is displayed, CA key and the
CUSTOM SETTINGS key become valid.
Writing