Sharp AR-BC260 Service Manual page 181

44 -9
Purpose Adjustment/Setting/Operation data output, check
(display, print)
Function Used to check the data related to the image forming
(Purpose) section correction (the corrected main charger grid
voltage in each print mode, the developing bias
voltage, etc.). (Used to check that correction is
performed normally or not.)
Section Process (Photoconductor, developing, transfer,
cleaning)
Item Data Operation data (Machine conditions)
Operation/ 1. By scrolling with the scroll key, each data of the
Procedure image forming section correction result. can be
checked.
2. [CPY/PRN] key selected: Process control mode is displayed.
[CAD] key selected: Drawing mode is displayed. (Printer, etc.)
[OTHER] key selected: The environment area and the number
of execution of process control are displayed.
(Displayed items)
Display
P (PROCON Main charger grid voltage/developing bias
MODE) voltage by high density image correction
(Y, M, C, K)
N (NORMAL MODE Actual main charger grid voltage/
(MIDDLE) developing bias voltage (Normal, medium
speed mode) (Y, M, C, K)
N (NORMAL MODE Actual main charger grid voltage/
(LOW) developing bias voltage (Normal, low
speed mode) (Y, M, C, K)
N (NORMAL MODE Actual main charger grid voltage/
(HIGH) developing bias voltage (Normal, high-
speed mode) (K)
TS (TONER SAVE Actual main charger grid voltage /
MODE) Developing bias voltage (toner save high/
medium/low speed mode) (K)
D (DRAWING Actual main charger grid voltage/
MODE (MIDDLE) developing bias voltage (Drawing, medium
speed mode) (Y, M, C, K)
D (DRAWING Actual main charger grid voltage /
MODE (LOW) Developing bias voltage (drawing, low
speed mode) (YMCK)
TEMPERATURE Temperature area
AREA
TEMPERATURE Temperature (HEX value)
HUMIDITY AREA Humidity
HUMIDITY Humidity (HEX value)
MD X STEP (M/L/H) Photoconductor drum membrane decrease
correction step (Max. 4 steps) /Correction
voltage
CONVERSION Discrimination of Sharp version and other
company version of toner cartridge
(0: SHARP, 1: Other company)
DESTINATION Destination of toner cartridge stored in the
machine memory
MODEL TYPE Toner cartridge application model (DM/AR)
CRUM Toner cartridge destination
DESTINATION (X)
Content
AR-BC260 SIMULATION 9 - 43
Display
DV X STEP (X) Developing bias voltage correction step
(corretion voltage) for toner cartridge life
HV Number of corrections of high density
image density
HT Number of corrections of half-tone image
density
44 -12
Purpose Adjustment/Setting/Operation data output, check
(display, print)
Function Used to check the sampling toner image patch
(Purpose) density data in the image forming section correction
(high-density correction) (process correction). This
simulation allows to check if the correction operation
is performed normally.)
Section Process (Photoconductor, developing, transfer,
cleaning)
Item Data Operation data (Machine conditions)
Operation/ The [TARGET] key and the [PATCH] key are used
Procedure to select the display of the correction target level of
each color and the toner image patch density
sampling data.
(Display items)
Display
CARB DATA Color image density sensor output level when
the calibration plate is detected by the basis of
the color image density sensor LED current
adjustment value.
ID (YMC) Actual target density level in high density image
correction
ID (K) Actual target density level in high density image
correction
n-1 Toner patch density (previous patch of nth patch
data) in high density image correction (Center
voltage - 50v) (n = 1 to 10))
n-2 Toner patch density (Medium patch of nth patch
data) in high density image correction (Center
voltage) (n = 1 to 10))
n-3 Toner patch density (following patch of nth patch
data) in high density image correction (Center
voltage + 50v) (n = 1 to 10))
Content
Content