Sharp AR-BC260 Service Manual page 208

66 -12
Purpose Operation test/check
Function Used to select a pattern and send it to the line and
(Purpose) the speaker at 300bps. (Level: soft SW setting)
(When the FAX is installed.)
Section FAX
Item Operation
Operation/ 1. Select the pattern to be sent.
Procedure 2. Press the [EXECUTE] key.
(Sendable voice message)
NO SIGNAL No signal (CML ON)
00000 Repetition of "00000"
11111 Repetition of "11111"
10101 Repetition of "10101"
11110 Repetition of "11110"
00001 Repetition of "00001"
66 -13
Purpose Setting
Function Used to register a dial number for test used in SIM
(Purpose) 66-14/15/16. (When the FAX is installed.)
Section FAX
Item Data
Operation/ If a dial number is already registered, it is displayed
Procedure on "PRESENT: ."
1. Enter a dial number with the 10-key (displayed
on NEW:) and press [SET] key. The registered
number is displayed on "PRESENT:."
66 -14
Purpose Adjustment
Function Used to adjust and check the make time of dial pulse
(Purpose) (10pps). (When the FAX is installed.)
Section FAX
Item Operation
Operation/ 1. Enter the make time to be set with the 10-key.
Procedure 2. Press [OK] key to set.
3. Press [EXECUTE] key to send the pulse (dial set
with SIM 66-13).
(Items to be set)
Item Set range
A Make time 0 – 15
Registration
Default
11 (Europe)
6 (Australia, New Zealand)
AR-BC260 SIMULATION 9 - 70
66 -15
Purpose Adjustment
Function Used to adjust and check the make time of the dial
(Purpose) pulse (20pps). (When the FAX is installed.)
Section FAX
Item Operation
Operation/ 1. Enter the make time to be set with the 10-key.
Procedure 2. Press [OK] key to set.
3. Press [EXECUTE] key to send the pulse (dial set
with SIM 66-13).
(Items to be set)
Item
A Make time
66 -16
Purpose Adjustment
Function Used to adjust and check the send level of DTFM
(Purpose) signal. (When the FAX is installed.)
Section FAX
Item Operation
Operation/ 1. Select an item to be adjusted with the scroll key.
Procedure 2. Enter the set value with the 10-key.
3. Press [OK] key to set.
4. Press [EXECUTE] key to send pulses (dial set
with SIM 66-13) from the line at each setting of
the high group and the low group of the send
level.
(Adjustable items)
Item
A Level (db)
B Difference between the high and the
low groups
Set range Default
0 – 15 8
Set range Default
0 – 15 5
0 – 15 1