Sharp AR-BC260 Service Manual page 168

24 -9
Purpose Data clear
Function Used to clear the printer mode counter and the self-
(Purpose) print mode print counter. (After completion of
maintenance, the counters are cleared.)
Section Printer
Item Counter
Operation/ 1. Select the counter to be cleared.
Procedure 2. Press the [EXECUTE] key.
The display for reconfirmation to clear is shown.
3. Select YES or NO to clear the counter.
YES: Clear
NO: Not clear
PRINT BW Printer mode print counter (B/W)
PRINT COL Printer mode print counter (Color)
OTHER BW Self print mode print counter (B/W)
OTHER COL Self print mode print counter (Color)
24 -10
Purpose Data clear
Function Used to clear the FAX counter. (with FAX installed)
(Purpose)
Section FAX
Item Counter
Operation/ 1. Select the counter to be cleared.
Procedure 2. Press the [EXECUTE] key.
The display for reconfirmation to clear is shown.
3. Select YES or NO to clear the counter.
YES: Clear
NO: Not clear
(Counters to be cleared)
Display
FAX SEND FAX send counter
FAX RECEIVED FAX receive counter
FAX OUTPUT FAX print number
SEND IMAGES FAX send number counter
SEND TIIME FAX send time
RECEIVE TIME FAX receive time
ACR SEND* Carrier prefix communication times
∗
ACR SEND is displayed only when the ACR function is enable.
When the operation is enable, [*] is displayed at the last.
Printer
Content
AR-BC260 SIMULATION 9 - 30
24 -15
Purpose Data clear
Function Used to clear the network scanner counter.
(Purpose)
Section Scanner section
Item Counter
Operation/ 1. Select the counter to be cleared.
Procedure 2. Press the [EXECUTE] key.
The display for reconfirmation to clear is shown.
3. Select YES or NO to clear the counter.
YES: Clear
NO: Not clear
(Counters to be cleared)
NETWORK Network scanner document scan quantity
SCANNER (BW) counter (B/W)
NETWORK Network scanner document scan quantity
SCANNER (COL) counter (Color)
SCANNER E-MAIL Scanner e-mail send counter
SCANNER FTP Scanner FTP send counter
25
25 -1
Purpose Operation test/check
Function Used to check the operation of the process section
(Purpose) (excluding the image process section) and the toner
remaining quantity sensor. (The toner remaining
quantity sensor output can be monitored.)
Section Process (Photoconductor, developing, transfer,
cleaning)
Item Operation
Operation/ 1. Select the color to check the toner remaining
Procedure quantity.
2. Press the [EXECUTE] key. The selected toner key is
highlighted, and all the drum motors rotate (117m/s), and the
specified toner remaining quantity sensor level is displayed.
After 10min, the motors stop, and the [EXECUTE] key returns
to the normal display.
When the [EXECUTE] key is pressed during rotation of the
motors, the motors will stop and the [EXECUTE] key will return to
the normal display.