Sharp AR-BC260 Service Manual page 72

3) Remove the front cabinet and the front frame cover.
4) Remove the multi manual paper feed unit.
5) Remove the connection right cabinet, the rear cabinet, and the
rear right cabinet.
6) Remove the screw and the paper feed unit. Remove the con-
nector.
∗ When assembling, fit the positioning pin A with section C.
<5> Paper feed drive motor
1) Remove the screw, the rear cabinet, the rear right cabinet, and
the connection right cabinet B.
2) Remove the screw, and remove the paper feed drive motor.
<6> Paper feed drive unit
1) Remove the harness and the screw, and remove the paper
feed drive unit.
C
A
AR-BC260 DESCRIPTIONS OF EACH SECTION 7 - 35
b. Multi manual paper feed
<1> Pickup roller
1) Open the arm cover (A). Disengage the pawl, and remove the
pickup roller (B).
B
<2> Paper feed roller
1) Open the arm cover (A), open the auxiliary PG (B), and
remove the paper feed roller (C).
C
<3> Paper separation roller
1) Open the vertical transport guide.
2) Open the maintenance cover (A) from the bottom of the multi
paper feed unit. Disengage the pawl and remove the paper
feed separation roller (B).
A
A
A
B
B