Sharp AR-BC260 Service Manual page 174

26 -53
Purpose Setting
Function Used by the user to set Enable/Disable auto color
(Purpose) calibration (auto adjustment of color balance and
density)
Item Specifications
Operation/ 1. Select Enable or Disable with the 10-key.
Procedure Disable 0: YES
Enable 1: NO
2. Press the [OK] key.
Set
Content
value
0 Disable auto color calibration (automatic
adjustment of copy color balance and density)
1 Enable auto color calibration (automatic
adjustment of copy color balance and density)
When "Disable" is selected, the user program does not show the
menu of the user auto color calibration (automatic adjustment of
copy color balance and density).
26 -54
Purpose Setting
Function Used to set enable/disable of auto color calibration
(Purpose) for the printer.
Item Specifications
Operation/ 1. Select Enable or Disable with the 10-key.
Procedure Disable 0: YES
Enable 1: NO
2. Press the [OK] key.
Set
Content
value
0 Disable auto color calibration (automatic
adjustment of printer color balance and density)
1 Enable auto color calibration (automatic
adjustment of printer color balance and density)
0: Disable. Easy calibration, test print, and color balance can be
performed in the color adjustment of key operation printer
setting.
1: Enable. Only auto color calibration can be performed in the
color adjustment of key operation printer setting.
Note: Selection of the adjustment with SIM 67-24 and the conven-
tional user color balance adjustment (key operation). (0 =
conventional user color balance adjustment, 1 = adjustment
with SIM 67-24)
Only in the adjustment with SIM 67-24, the printer half-tone
process control is enabled.
This function is used to select the user color balance
adjustment (key operation) when the user wants to adjust
manually by himself.
26 -57
Purpose
Function
(Purpose)
ためた
Item
Operation mode
Operation/
Procedure
Model
AR-BC260
AR-C172M
Default
1
26 -65
Purpose
Function
(Purpose)
ためた
Item
Operation/
Procedure
Item
STAPLE
LIMIT
Operation mode
Default
1
AR-BC260 SIMULATION 9 - 36
Setting
Used to set the model name for use as the status
information.
Specifications
The current model name (AR-BC260) is highlighted.
∗
There is only one model name, and no selection is
allowed.
Default
For USA/Canada
Except for USA/Canada
Setting
Used to set the finisher alarm mode.
Specifications
Press the key which shows the staple limit quantity.
The entered number is set and the pressed key is
highlighted.
Content Set value
Staple limit 30 Staple limit quantity: 30
quantity
50 Staple limit quantity: 50
Default
30