Sharp AR-BC260 Service Manual page 30

D. Job status screen (common to print, copy, network scan and fax)
This screen is displayed when the [JOB STATUS] key on the operation panel is pressed.
A job list showing the current job at the top of the job queue or a list showing completed jobs can be displayed.
The contents of jobs can be viewed or jobs can be deleted from the queue. (The screen below is an example and differs from actual
screens.)
1
JOB QUEUE
COPY
SHARP001
066211221
PRINT JOB
3
No.
Name
1 Job list
2 Mode select key
3 [PRINT JOB] key
4 [SCANNER JOB] key
5 [FAX JOB] key
6 Display switching keys
7 [STOP/DELETE] key
8 [PRIORITY] key
9 [DETAIL] key
SETS / PROGRESS
003 / 000
003 / 000
001 / 000
SCANNER JOB
4
This shows the current job and the jobs waiting to be run. The icons to the left of the jobs in the queue
show the job mode.
Copy mode
Network scanner mode
Fax send job
The displayed jobs in the job list are themselves operation keys. To cancel printing or to give a job the
highest print priority, touch the relevant job key to select the job and execute the desired operation using
the keys described in 5 and 6.
* "PAPER EMPTY" in the job status display
When a job status display indicates "PAPER EMPTY", the specified paper size for the job is not loaded in
any of the trays.
When the [DETAIL] key appears, the key of a job in the job queue can be touched followed by the
[DETAIL] key to change the paper size selection to a different paper size (only in printer mode).
This only appears in the job status screen of fax mode. The key is used to switch the job list display
between "JOB QUEUE" and "COMPLETE".
"JOB QUEUE": Shows stored jobs and the job in progress.
"COMPLETE" : Shows finished jobs.
Use to display the print job list for printer, copy and fax mode.
This displays a list of only the jobs that use the network scanner function. (Only when the network
scanner function is added.)
This displays the transmission/reception status and finished jobs of fax mode when the fax option is
installed.
Use to switch the page of the displayed job list.
Use to cancel or delete the current job or delete the selected reserved job. Note that a fax print job cannot
be cancelled or deleted.
This only appears in the job status screen of fax mode. Touch this key to give priority to a job that has
been selected in the job queue.
The key is only effective for computer print jobs and only appears in the job status screen of the printer
mode. It is used to display detailed information of a selected print job and to change the paper size for the
print job.
AR-BC260 EXTERNAL VIEW AND INTERNAL STRUCTURE 6 - 4
STATUS
* 1/1
PAPER EMPTY
WAITING
WAITING
FAX JOB
5 6
Parts
Function
Printer mode
Fax reception job
2
JOB QUEUE
COMPLETE
DETAIL
PRIORITY
STOP/DELETE
7 8 9