Sharp AR-BC260 Service Manual page 173

[Target item]
∗
Maintenance preset counter (Depending on the set value of
SIM21-1.)
∗
Consumable part replacement timing
Transfer belt (Depending on the set value of SIM21-1.)
Fusing unit (Depending on the set value of SIM21-1.)
OPC drum
When the toner cartridge is emptied, printing is stopped regardless
of this setup.
Item Content
A (0:CONTINUE Used to set
1:STOP) "Continue/Stop" of
printing when the
maintenance timing
(replacement timing
of each consumable
part) is reached.
26 -41
Purpose Setting
Function Used to set Enable/Disable of AMS operation in the
(Purpose) center-binding mode.
Item Specifications
Operation/ Enter the corresponding code of Enable/Disable of
Procedure AMS operation in the center-binding mode with the
10-key pad, and press the [OK] key.
∗
The B/W start key or the color start key cans be used instead of
the [OK] key in the above procedure.
(Setting of AMS in the center binding mode)
Item Content
A Setting of AMS
(0:NO
operation in the
1:YES)
center binding
mode
26 -49
Purpose Setting
Function Used to set the copy speed mode.
(Purpose)
Item Specifications
Operation/ 1. The highlighted key is the currently set key.
Procedure 2. When each key is pressed, the selected set
value is saved in the EEPROM, and the pressed
key is highlighted.
∗
Each set item has one content of setting.
(Set value)
Set
Item
value
POSTCARD LOW Postcard copy speed: 6 CPM
HIGH Postcard copy speed: 13 CPM
Set value Default
0 Continues 0
printing.
1 Stops
printing.
Set value Default
0 AMS operation 1: Europe
is disabled. and UK
0: Others
1 AMS operation
is enabled.
Operation mode
Content Default
LOW
AR-BC260 SIMULATION 9 - 35
26 -50
Purpose Setting
Function Used to set Black-White reverse, group rounding,
(Purpose) and scanner send time display.
Item Specifications
Operation/ 1. Select an item with the scroll key.
Procedure 2. Enter the set value with the 10-key, and press
the [OK] key.
3. Press the B/W start key or the color start key to
save the set value in the EEPROM.
(Items to be selected)
Item Content
A (0: Display disabled B/W reverse
1: Display enabled) disable/enable
setting
B (0: Group rounding Group rounding
allowed setting
1: Group rounding
inhibited)
C (0: Display disabled Scanner mode
(1: Display enabled) send time
display setting
∗
When item C is set to 1 (display enable), the scanner send time
is set to 0 sec for USA and Canada in connection with the
destination, or to 60 sec for the other destinations. When set to
0 (Display disable), the scanner send time is set to 60 sec.
0 (Display disabled)
USA & Canada Send time 60sec
Other than USA & Send time 60sec
Canada
26 -52
Purpose Setting
Function Used to set YES/NO of count up of non-copy paper
(Purpose) (cover or insertion paper).
Item Specifications
Operation/ 1. Enter the set value corresponding to the
Procedure operation mode with the 10-key.
2. Press the [OK] key.
∗
The B/W start key or the color start key can be
used instead of the [OK] key in the above
procedure.
(B/W count up setting)
Item Content
A (0:DON'T Non-copy
1:DO) paper count-up
setting
Non-print paper (white paper)
No-print-on-cover paper (Copy/Printer)
No-print-on-OHP-insertion paper (Copy/Printer)
Operation mode
Set range Default
0 – 1 UK: Disable
Other: Enable
0 – 1 0
0 – 1 USA, Canada:
Enable
1 (Display enabled)
Send time 0sec
Send time 60sec
Operation mode
Set value Default
0 Not count up. 1
1 Counts up.