Sharp AR-BC260 Service Manual page 165

RSPF Automatic document feeder
DESK/ADU Desk/Duplex unit
LCC Large capacity cassette
INVERTER Bypass module
FIN/SORTER Rear process unit
PUNCHER Punch unit
FAX FAX
FAX MEMORY FAX expansion memory
HAND SET Handset
SDRAM SDRAM capacity
PRINTER Printer
PRINTER MEMORY Printer memory
HDD Hard disk capacity
NIC NIC
NETWORK SCANNER Network scanner
FONT ROM Kanji font
PS PostScript
DATA SECURITY Security
E-MAIL DIAG E-MAIL DIAG
SCAN I/F Scanner expansion board
When installed: The model number of each unit is displayed.
When not installed: "NONE" is displayed.
22 -11
Purpose Adjustment/Setting/Operation data output, check
(display, print)
Function Used to check the number of use of FAX.
(Purpose) (With FAX installed)
Section FAX
Item Counter
Operation/ The FAX send/receive counter value is displayed.
Procedure
(Counter values to be displayed)
Display
FAX SEND FAX send counter
FAX RECEIVED FAX receive counter
FAX OUTPUT FAX print number
SEND IMAGES FAX send number counter
SEND TIME FAX send time
RECEIVED TIME FAX receive time
ACR SEND* Carrier prefix communication times
∗
ACR SEND is displayed only when the ACR function is enable.
When the operation is enable, [*] is displayed at the last.
Content
AR-BC260 SIMULATION 9 - 27
22 -12
Purpose Adjustment/Setting/Operation data output, check
(display, print)
Function Used to check the misfeed positions and the number
(Purpose) (history) of misfeed at each position. (If the misfeed
count is considerably great, it may be judged as
necessary to repair.)
Section Automatic document feeder
Item Trouble
Operation/ The misfeed counter value is displayed.
Procedure
The misfeed history positions in automatic document feeder are
displayed with the names of sensors and detectors from the latest
one. Max. 50 items of information can be stored, and the oldest
one is deleted sequentially. The machine condition can be
estimated according to this data.
(Jam code list)
Code
SPF SPAPER SPAPER_N
SPAPER_S
SPOUT SPOUT_N
SPOUT_S
22 -13
Purpose Adjustment/Setting/Operation data output, check
(display, print)
Function Used to check the process cartridge counter. (If the
(Purpose) count number is considerably great, it may be
judged as necessary for repair.)
Section Process section
Item Counter
Operation/ The process counter value of the process cartridge
Procedure is displayed.
(Counter values to be displayed)
Display
DRUM CTRG K Drum cartridge print counter (K)
DRUM CTRG C Drum cartridge print counter (C)
DRUM CTRG M Drum cartridge print counter (M)
DRUM CTRG Y Drum cartridge print counter (Y)
DRUM RANGE K Drum cartridge accumulated mileage time
(mm) (K)
DRUM RANGE C Drum cartridge accumulated mileage time
(mm) (C)
DRUM RANGE M Drum cartridge accumulated mileage time
(mm) (M)
DRUM RANGE Y Drum cartridge accumulated mileage time
(mm) (Y)
TONER RANGE K Toner cartridge accumulated mileage time
(mm) (K)
TONER RANGE C Toner cartridge accumulated mileage time
(mm) (C)
TONER RANGE M Toner cartridge accumulated mileage time
(mm) (M)
Option
Misfeed
Content
SPF paper feed sensor not-
reached jam
SPF paper feed sensor
remaining jam
SPF paper exit sensor not-
reached jam
SPF paper exit sensor
remaining jam
Content