Sharp AR-BC260 Service Manual page 146

Code
Function (Purpose)
Main Sub
46 5 Used to adjust the image density
(monochrome mode) in the network
scan mode.
6 1) Used to set the CCD black level
offset level.
2) Used to set the CCD white level
gain.
8 Image color balance adjustment in
the network scan mode
9 Used to set the exposure adjustment
value in each document feeder unit
mode.
10 Used to adjust the copy color
balance (color) (copy document
mode) (gamma/density adjustment
for each color)
11 Used to adjust the copy color
balance (color) (text mode/map
mode) (gamma/density adjustment
for each color)
12 Used to adjust the copy color
balance (color) (text/printed photo
mode/Photograph mode) (gamma/
density adjustment for each color)
13 Used to adjust the copy color
balance (color) (photograph mode)
(gamma/density adjustment for each
color)
14 Used to adjust the copy color
balance (color) (text/photograph
mode) (gamma/density adjustment
for each color)
15 Engine color balance manual
correction
16 Used to adjust the gamma and
density. (Monochrome mode) (The
adjustment check pattern is printed.)
19 1. Used to set half tone (gamma)
selection (destination setting) in
the monochrome auto copy
mode.
2. Used to set the automatic
exposure operation mode
(Monochrome copy mode, FAX
mode, monochrome scanner
mode).
20 Used to adjust copy color balance
(All color copy mode gamma/density
adjustment) (All color copy mode
color balance/gamma/density are
changed.) Same as SIM 46-21,
however, printing is not performed.
21 Used to adjust copy color balance
(All color copy mode gamma/density
adjustment) (All color copy mode
color balance/gamma/density are
changed.)
23 Used to set Enable/Disable of half-
tone high-density correction.
24 Used to adjust the copy color
balance automatically. (All color copy
mode gamma/density adjustment)
25 Used to adjust copy color balance
(Single color mode)
26 Used to set the copy color balance
adjustment to the default. (Single
color copy mode)
27 Used to adjust the gamma/density in
the black edge section of the copy
mode image. (Black text and black
line reproduction adjustment)
28 Used to check pre-scanning
operation for automatic recognition of
document in the color auto copy
mode. (This simulation is used only
in production, and not used in the
market.)
Purpose
Adjustment Scanner (reading)
Adjustment Scanner (reading)
Adjustment Scanner (reading)
Setting Automatic document
feeder
Adjustment Image process (ICU)
Adjustment Image process (ICU)
Adjustment Image process (ICU)
Adjustment Image process (ICU)
Adjustment Image process (ICU)
Adjustment Image process (ICU)
Adjustment Image process (ICU)
Adjustment Scanner (reading)
Adjustment Image process (ICU)
Adjustment Image process (ICU)
Setting
Adjustment
Adjustment Image process (ICU)
Adjustment Image process (ICU)
Adjustment Image process (ICU)
Adjustment Image process (ICU)
AR-BC260 SIMULATION 9 - 8
Section
Picture quality
Picture quality
Picture quality
Picture quality
Picture quality
Picture quality
Picture quality
Picture quality
Picture quality
Picture quality
Picture quality
Picture quality
Picture quality
Picture quality
Picture quality
Picture quality
Picture quality
Picture quality
Picture quality
Picture quality
Item
Density
Color balance
Color balance
Color balance
Color balance
Color balance
Density
Density
Color balance
Color balance
Color balance
Color balance
Color balance
Color balance
Color balance
Color balance