Sharp AR-BC260 Service Manual page 205

No. Content
15 256-gradation pattern
(Fixed gradation)
16 256-gradation pattern
(Certain gradation)
(Gradation specified from
external)
17 Whole background (half
tone)
18 256-gradation pattern
(Other dither)
19 256-gradation pattern
(Text dither)
20 Half background print
21 Half background dot print
22 1/4 background print
23 1/4 background dot print
65
65 -01
Purpose Adjustment
Function Used to adjust the touch panel (LCD display section)
(Purpose) detection position.
Section Operation (Display, procedure)
Operation/ 1. Touch the four cross marks. The coordinates at
Procedure the pressed point are set.
When the coordinates are properly set, the mark "+" on the display
turns to gray. When all the four points are pressed, the display
returns to the normal display.
65 -02
Purpose Adjustment/Setting/Operation data output, check
(display, print)
Function Used to check the result of the touch panel (LCD
(Purpose) display) detection position adjustment. (The
coordinates are displayed.)
Section Operation (Display, procedure)
Operation/ When the touch panel is pressed, the AD value in
Procedure each of X and Y directions at that point and the
coordinate values are displayed in ( ) as well as the
coordinate values of each point. It is based on the
coordinates set with SIM 65-1.
Pattern
Gradation Density
generating
selection selection
device
❍
Input None
process
❍
Input None
process
❍ ❍
Half tone
❍
Half tone None
❍
Half tone None
❍ ✕
LED
❍ ✕
LED
❍ ✕
LED
❍ ✕
LED
AR-BC260 SIMULATION 9 - 67
66
66 -01
Purpose Setting
Function Used to change/set the soft SW setting (FAX-related
(Purpose) items). (When the FAX is installed.)
Section FAX
Operation/ 1. Enter the soft SW number to be selected with the
Procedure 10-key.
2. Change or set the selected soft SW setting.
3. Enter [EXECUTE] key to save the setting.
The FAX-related soft SW setting is displayed on the LCD for
checking and changing.
66 -02
Purpose Setting
Function Used to initialize the soft SW setting (FAX-related
(Purpose) items) according to the destination.
(When the FAX is installed.)
Section FAX
Item Data
Operation/ 1. Enter the destination code with the 10-key, and
Procedure press [SET] key.
2. Press the [EXECUTE] key. (YES/NO key display)
3. When [Yes] key is pressed, the soft SW is initialized according
to the destination code. (When [No] key is pressed, the
operation is canceled.)
The current destination code is displayed in the PRESENT
column. When [SET] key is pressed under this state, the
destination code same as that displayed in the PRESENT column
is displayed in the NEW column.
When [DEST CODE] key is pressed, the display is changed to the
message display window, indicating the country code.
Initializing